AP Mode
Toggling
WEC/Reset
(Press 8 sec)
There are two alternative AP modes defined for the
device to operate with WEC (Wireless Easy
Connection) feature. One is Master Mode (by
default), and the other is Slave Mode.
To change the AP mode from one to the other, you
have to:
1. Press the WEC/Reset button for 6~10 seconds,
and then release it.
2. The WiFi LED becomes OFF in 3 ~ 5 seconds,
3. After about 20 ~ 25 seconds, the WiFi LED will
be lit ON again to indicate that the AP Mode is
changed.
It takes about 36 seconds to change (toggle) the
AP Mode completely.
WiFi Green LED : Device is in Master Mode
WiFi Amber LED: Device is in Slave Mode
Reset Slave AP
Configuration
WEC/Reset
(Press 13
sec)
1. Press the WEC/Reset button for about 11~15
seconds and release it.
2. The Slave AP will be marked as an un-
configured device, so that it can be paired with
another Master or configured Slave AP later.
For Master AP, there is no effect on this button
behavior.
Reset to Default
WEC/Reset
(Press 20
sec)
1. Press the Reset/WEC button for about 20
seconds till the Status LED becomes solid
Green to indicate that the reset to default
function is triggered. Release the button.
2. Then, the device will reboot automatically and
apply the factory default settings as well.
It takes about 2 minutes to finish the reset to
factory default operation.
