Use WEC button to setup wireless profiles
WEC (Wireless Easy Connection) is an easy configuration feature that is
similar to well-known WPS function. It can be used to duplicate one
device's wireless configuration to the other AP devices from the same
manufacture by clicking one button for both devices.
There are two alternative AP modes defined for the device to operate with
WEC (Wireless Easy Connection) feature. One is the Master Mode (by
default), and the other is the Slave Mode. Before starting to use WEC to
configure your AP devices, you have to learn how to identify and set the
device in the Master Mode, or the Slave Mode (As stated in Section 1.2.4
and 1.2.5).
One Master and several isolated Slaves
As illustrated in above figure, how to configure the three APs (AP1, AP2,
AP3) to build up the "staff" wireless network? You can follow the
procedure bellow:
