Digisol DG-GS4826S Скачать руководство пользователя страница 456

Страница: 456 / 1344

HAPTER

| Multicast Filtering

Layer 3 IGMP (Query used with Multicast Routing)

– 456 –

Show Detail

The following additional information is displayed on this page:

VLAN

– VLAN identifier. The selected entry must be a configured IP

interface. (Range: 1-4093)

Group Address

– IP multicast group address with subscribers directly

attached or downstream from the switch, or a static multicast group

assigned to this interface.

Interface

– The interface on the switch that has received traffic

directed to the multicast group address.

Up Time

– The time elapsed since this entry was created. (Depending

on the elapsed time, information may displayed for w:weeks, d:days,

h:hours, m:minutes, or s:seconds.)

Group Mode

– In INCLUDE mode, reception of packets sent to the

specified multicast address is requested only from those IP source

addresses listed in the source-list parameter. In EXCLUDE mode,

reception of packets sent to the given multicast address is requested

from all IP source addresses, except for those listed in the source-list

parameter and for any other sources where the source timer status has

expired.

Group Source List

– A list of zero or more IP unicast addresses from

which multicast reception is desired or not desired, depending on the

filter mode.

Source Address

– The address of one of the multicast servers

transmitting traffic to the specified group.

Up Time

– The time elapsed since this entry was created.

(Depending on the elapsed time, information may displayed for

w:weeks, d:days, h:hours, m:minutes, or s:seconds.)

V3 Expire

– The time remaining before this entry will be aged out.

The V3 label indicates that the expire time is only provided for

sources learned through IGMP Version 3. (The default is 260

seconds.)

Forward

– Indicates whether or not traffic will be forwarded from

the multicast source.

NTERFACE

To display the current multicast groups learned through IGMP:

Click Multicast, IGMP, Group Information.

Select Show Information from the Action list.

Select a VLAN. The selected entry must be a configured IP interface.

Содержание DG-GS4826S

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание DG-GS4826S

Отзывы:

Похожие инструкции для DG-GS4826S

Бренды по названию

Популярные бренды

Digisol DG-GS4826S, Руководство по управлению

Результаты поиска

Содержание DG-GS4826S

Отзывы:

Похожие инструкции для DG-GS4826S

Бренды по названию

Популярные бренды