manualshive.com logo in svg

Digisol DG-GS4628S, Руководство по установке, Страница: 25 / 25

Поделиться
Скачать
Digisol DG-GS4628S Скачать руководство пользователя страница 25

 

 

Hardware Installation 

2.3.10 PoE Power Supply Connection 

When using PoE function of DG-GS4600S, it needs to connect the external PoE 

power with 5 holes socket. The connection procedure is described as below:   

1. Insert one end of PoE power cable provided in the accessory kit into the external PoE 

power (with overload and leakage protection), and the other end to PoE power socket in 

the back panel of the switch. 

2. Connect PD device to the front port of DG-GS4600S.   

3. Check whether PD device is powered and the port indicator status shows the power 

supply normally. 

 

Caution! 

The input voltage must be within the required range, otherwise the switch can be 

damaged or malfunction. PoE power supply of the front port is disabled when the switch is 

power-off or is not started. If there is any problem, do not open the switch shell without 

permission. It can cause physical injury. 

This product comes with Life time warranty. For further details 

about warranty policy and Product Registration, please visit 

support section of 

www.digisol.com

       

 

           

 

2-12

Содержание DG-GS4628S


























Отзывы:

Нет отзывов