58
Remote Viewing on Internet Explorer
REMOTE VIEWING ON INTERNET
EXPLORER
You can also view your system remotely using Internet Explorer (version 8 or later required).
NOTE:
Remote viewing is only compatible with Internet Explorer. Mozilla Firefox, Opera, Safari,
and other browsers are not supported.
Prerequisites
• The HTTP Port (default:
80
) and Client Port (default:
35000
) must be port forwarded to your
router.
• You must create a DDNS account, and have the DDNS settings configured in your NVR. For
details, see “Appendix D: Setting Up DDNS Service” on page 98.
• The NVR must have internet access.
To view your system using Internet Explorer:
1. Open Internet Explorer. It is recommended to select
Run as Administrator
when opening
Internet Explorer to ensure full functionality.
2. In the address bar, enter your system’s IP address or DDNS address followed by the HTTP
Port (default:
80
). For example,
http://192.168.1.1:80
or
http://tomsmith.myddns-flir.com:80
NOTE:
You MUST include
http://
in order to access your system.
3. An attention bar appears at the top or bottom of the screen to prompt you to install ActiveX
plugins, click
Install
or
Allow
and follow the prompts to install the plugins.
4. Enter the system user name and password (by default
admin
/
000000
).
5. Select
LAN
to connect using the main (high quality) stream. Select
WAN
to use the substream
to conserve bandwidth and for improved performance when connecting over the Internet.
6. Click
Login
to log in.
Enter the system User Name
and Password
Содержание DNR200 Series
Страница 49: ...39 Using the Main Menu...
