Digimerge DNR200 Series, Инструкция по эксплуатации

Страница: 57 / 122

47
3. Check Search .
Select alarm type
Check Search
Select NVR and channel
Enter start and end time
Click Search
4. Under Device , select the NVR you would like to search.
5. Under Start Time and End Time , enter the start and end times for your search.
6. Click Search . A list of relevant alarms appears below.
Using Playback Mode
You can view recorded footage from your NVR’s in the CMS software.
To use playback mode:
1. Click Playback ( ) .
2. Under Device , select the NVR and channel you would like to search.
Select NVR
Select Channel
Select search
parameters
Click Search
• Check Multiple channel to playback video from multiple cameras. Select camera and then
click Add . Repeat to add additional cameras.
3. Under Parameter , select the start and end time for the search.
4. Click Search .