Installation Overview
SECTION 3
16
HARDWARE MANUAL |
Copyright
©
2007 Digimerge Technologies Inc.
Installation Overview
There are 3 mains steps required to perform a successful installation:
• Hardware installation
• Software installation
• Network configuration
Hardware Installation
The Hardware installation consists of connecting
cables to the Camera including network (video), and
power cables. Other connections are optional.
1. Mounting Instructions: Run the cables to the
desired location and assemble the stand by
screwing together the different parts to get the
desired configuration. Securely mount the stand to
a wall or other surface using the provided screws.
Connect a lens with a CS Mount to the Camera
(See Appendix #3 for DC Auto Iris Lens installation).
Leave lens cap on until the end of the install.
Connect camera to the base (confirm that the
camera is the right side up) by screwing the bottom
onto the mounted stand.
2. Network: Connect the provided CAT-5 Ethernet
(Network) cable to the Camera network connector.
A longer CAT-5 cable can be used if desired (not
included).
NOTE
: CAT-5 Ethernet Cabling has a maximum
effective range of 100m (330 ft.) depending on the
cable/switcher quality. For a longer run, a repeater
device may be required.
3.
GPIO PTZ / Alarm (Optional): Connect the
mini-DIN Terminal Block cable to the Camera DIN
connector. This allows for additional options such
as connecting to an external monitor, controlling a
PTZ device and/or adding alarm inputs/outputs.
For more details on the available Terminal Block
connections, please see Appendix #2 in this
manual.
1
2
3
Содержание DNP5220E
