background image

Under the copyright laws,  this documentation may not be copied, photocopied, reproduced, translated, or reduced to 
any electronic medium or machine-readable form, in whole or part without the prior written consent of Digimerge 
Technologies Inc., except in the manner described in the documentation. 
 

© Copyright 2003 

 

Digimerge Technologies Inc. 

300 Alden Road 

Markham, Ontario 

L3R 4C1  CANADA 

 

 

All rights reserved.  Printed in Taiwan. 

 
 
 
 
 
 
 
 
 
 

NOTE: 

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of 

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment 
is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not 
installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. 
However, there is no guarantee that interference will not occur in a particular installation.    
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required 
to correct the interference at one’s own expense. 
 

CAUTION: 

CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR 

COMPLIANCE COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. 
 

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. 
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: 

1.  THIS DEVICE MAY NOT CAUSE HARMFULL INTERFERENCE, AND 
2.  THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,

INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED
OPERATION. 

Содержание DGR109





































Отзывы: