D i g i g r a m
8
miXart 8 ES
•
Full length audio card for PCI bus
•
8 balanced
∗
mono analog inputs (4 line/mic with phantom power)
•
8 servo-balanced
∗∗
mono analog outputs
•
Clock programmable from 7 to 50 kHz
(selectable between 48 kHz and 44.1 kHz for EtherSound use, unless
when serving as Primary Master: in this case 48 kHz only)
•
8 EtherSound mono input channels (PCM 24 bits, on RJ45)
•
8 EtherSound mono output channels (PCM 24 bits, on RJ45)
•
MPC8240 Power PC processor at 250 MHz
•
16 MB memory SD-RAM
Main software features
•
PCM, scrub, time-stretching, mixing, routing, level adjustment, phase
inversion, mute, panning, balance, parametric equalization,
compression/expansion, noise gate
•
Optional:
MPEG layer I & II encoding/decoding, layer III decoding, Sample Rate
Conversion, Delay
REQUIREMENTS
The miXart 8 range has been developed for IBM and IBM-compatible PC
systems.
Minimum hardware requirements
•
Pentium III minimum (or equivalent)
•
128 MB RAM
•
One free PCI or PCI-X slot (5 V or 3.3 V)
Note:
on computers with more than 512 Mb RAM, the miXart board administration
service may take some time to get initialized (several minutes) during
Windows start-up.
Sound cards of the miXart 8 range run under Windows 2000 and
Windows XP
