miXart 8 range
User’s Manual
9
HARDWARE INSTALLATION
Note:
We recommend the installation of the miXart software prior to hardware
installation.
Installing the card
Gently plug the card in a free PCI(-X) slot and press it down to position it
firmly. Tighten the screw.
Interrupt and memory address
Hardware interrupt and addresses are automatically set up at start-up by the
PCI PnP BIOS.
SOFTWARE INSTALLATION
Please visit the Digigram web site (www.digigram.com) for the most recent
driver.
In case you run a specific application developed or installed by a Digigram
Partner, it might require the use of a specific driver version. In this case, make
sure that the updated driver has been approved by your supplier.
Installing the miXart driver and VConsole Builder
If a previous version of the driver has been installed on the computer, it must
be removed before the installation of a new version. For the uninstall process
of old driver versions, please refer to the corresponding section further on in
this manual.
If you have downloaded the miXart Kit from the Digigram web site, run the
downloaded self-extractable file. The driver installation files are then extracted
into a folder of your choice.
The driver of the card must be installed prior to inserting the card in the PC.
If you insert the card and the driver has not been installed, the Windows
Hardware Wizard will automatically detect your new hardware after logon.
Click on the Cancel button in the Welcome to the Found New Hardware
Wizard screen.
You are now ready to install the miXart software.
•
Execute miXartInstall.exe icon to launch the InstallShield Wizard:
