Digiflex vision-64, Руководство пользователя

Страница: 7 / 32

7 Vision-64 User Guide
Issue 1.02
Copyright
©
2002-2004 Digflex Pty Ltd
Icon Status Meaning
On
The area is turned off.
Off The area is turned All On or Part On
On
The area is turned All On
Off
The area is turned Off
On
You have mail waiting to be read
Off
No Mail
On
Area is ready to turn on (All On / Part
On)
Off
Not ready, Zone Open
Red
LED
On
All On
Flashing
Alarm
Green
LED
On Area is off.
Flashing
Area not ready to turn on
Red &
Green
LED
Flashing Installer programming mode is active.
Table 3: Status ICONs, LED Indicator’s and Their Meanings
KEYPAD TONES
Your keypad emits several distinct tones and displays text to
alert you to system events. Additional bells or sirens may also be
connected to your system. Bells or sirens mounted on the exterior
of your premises alert neighbours to emergencies and provide an
audible guide for police and fire fighters.
Type
Meaning
Fire
Alarm
Tone
When a fire zone sounds an alarm, the keypad will
sound 3 seconds on and 2 seconds off (repeat).
Burglary
Alarm
Tone
When a burglary zone activates while your system
is turned on, your keypad emits a continuous
siren tone. It sounds for the time set by your
security company.
Trouble
Tone
When a system component is not functioning
properly, your keypad sounds 4 fast short beeps
followed by a 5 second pause (repeat).
Key
Press
Tone
Pressing any key on the keypad sounds one short
beep, indicating that the key press is accepted.
Entry
Delay
Tone
When you enter the premises through a zone
programmed for entry delay, the keypad sound a
Hi/Low tone to remind you to turn off the area.
If the area is not turned off before the entry delay
expires, an alarm condition will sound and a
report may be sent to your alarm company.
Exit
Delay
Tone
After you turn an area All On, the keypad will
sound 1 short beep every second. During the last
10 seconds fast short beeps will be heard. If you
don’t exit before the delay time expires and an
exit delay door is faulted, an alarm occurs.
Error
Tone
If you press an incorrect key, your keypad will
sound a 2 second tone.
Menu
Mode
The keypad will sound a Hi / Lo tone to indicate
you have entered MENU Mode and a Lo/Hi tone
to indicate you have exited MENU mode.
Chime
Tone
The keypad sounds fast short beeps to alert you
when a zone programmed for chime is faulted or
unsealled.
Table 4: Keypad Tones and Their Meanings
Figure 1: CM100 Graphic Keypad