Digiflex vision-64 Скачать руководство пользователя страница 19

Страница: 19 / 32

Vision-64 User Guide

Issue 1.02

2002-2004 Digﬂex Pty Ltd

scroll through the different characters available. To clear all

text from the cursor position to the right, press the [OFF]

key.

4. Press [OK] to save and exit, or press [MENU] to exit without

saving.

Outputs > Output Testing >

External Siren Test

MENU 4-9-0

This menu allows you to test any external sirens which have been
connected by your installer. The test will last for 5 seconds.

1. Enter [MENU] + [4] + [9] + [0].

If the system has been partitioned, the keypad will display a

list of areas.

A001 Area 1 Name

A002 Area 2 Name

A003 Area 3 Name
PRESS



OK or MENU

2. Use the [

↑

] and [

↓

] keys to select the area that you want to

test the siren, then press [OK]. Alternatively, you can enter

the area number, then press [OK].

The keypad will display the following during the siren test.

External Audible
Testing Press any key to
abort
Press OK or MENU

When the siren test is complete, the keypad will display the

following:

Testing Complete. Press
OK to continue

Press OK or MENU

3. Press [OK] to exit.

Outputs > Output Testing >

Internal Siren Test

MENU 4-9-1

This menu allows you to test any internal sirens which have been
connected by your installer. The test will last for 5 seconds.

1. Enter [MENU] + [4] + [9] + [1].

If the system has been partitioned, the keypad will display a

list of areas.

A001 Area 1 Name

A002 Area 2 Name

A003 Area 3 Name
PRESS



OK or MENU

2. Use the [

↑

] and [

↓

] keys to select the area that you want to

test the bell, then press [OK]. Alternatively, you can enter

the area number, then press [OK].

The keypad will display the following during the bell test.

Internal Audible Testing
Press any key to abort

Press OK or MENU

When the bell test is complete, the keypad will display the

following:

Testing Complete. Press
OK to continue

Press OK or MENU

3. Press [OK] to exit.

Outputs > Output Testing >

Strobe Test

MENU 4-9-2

This menu allows you to test the external strobe light.

1. Enter [MENU] + [4] + [9] + [2].

If the system has been partitioned, the keypad will display a
list of areas.

A001 Area 1 Name

A002 Area 2 Name

A003 Area 3 Name
PRESS



OK or MENU

2. Use the [

↑

] and [

↓

] keys to select the area that you want to

test the strobe, then press [OK].

Alternatively, you can enter the area number, then press

[OK].

The keypad will display the following during the strobe test.

Strobe Activated. Will
Reset On exit

Press OK or MENU

Check and verify that the strobe light is on.

3. Press [OK] to exit.

Содержание vision-64

































Результаты поиска

Содержание vision-64

Отзывы:

Похожие инструкции для vision-64

Бренды по названию

Популярные бренды

Digiflex vision-64, Руководство пользователя

Результаты поиска

Содержание vision-64

Отзывы:

Похожие инструкции для vision-64

Бренды по названию

Популярные бренды