DigiDesign MachineControl, Руководство пользователя

Страница: 44 / 60

MachineControl Guide 40
Track Arming in Remote 9-Pin
Deck Emulation Mode
In Remote 9-Pin Deck Emulation mode,
Pro Tools can be configured to either respond
to, or ignore, track arming (record enabling)
commands. Pro Tools communicates track
record status back to the control machine.
9-Pin Commands
In Remote 9-Pin Deck Emulation Mode,
Pro Tools with MachineControl can respond to
the following 9-pin commands from compatible
workstations, synchronizers, and other devices:
• Play
• Stop
• Pause
• Rewind
• Forward
• Cue To
• Poll Time Code
• Record Arm Track
• Set In/Out Point (for Auto Edit)
• Set Pre/Post Roll (for Auto Edit)
• Perform Auto Edit Record
• Perform Punch-In/Punch-Out Record (re-
quires QuickPunch mode and voices)
• Return Status-Online, State, Tracks Armed
• Servo Lock
• Clear “In” Point
Ignore Track Arming Commands
You can set Pro Tools to ignore incoming track
arming (record-enable) commands. Use this to
record-safe Pro Tools if, for example, you are us-
ing a master 9-pin transport controller to arm
tracks on several other machines, but not
Pro Tools tracks. You can still manually arm
Pro Tools audio tracks, as needed.
To have Pro Tools ignore remote track arming
commands:
1
Choose
Setup > Preferences
, and click the
Syn-
chronization tab.
2
In the Remote Mode section, select
Ignore
Track Arming
.