DigiDesign MachineControl, Руководство пользователя

Страница: 12 / 60

MachineControl Guide 8
To increase reliability in long cable runs in Remote
mode:
„
Follow the instructions as described above for
setting up a Rosetta Stone convertor for a
Tamura
To increase reliability in long cable runs in Serial
Deck Control mode:
1
Connect the RS-232 cable from your com-
puter’s COM port into the RS-232 side of the Ro-
setta Stone adapter.
2
Connect the RS-422 cable from the RS-422
side of the Rosetta Stone to the deck or 9-pin
patch bay. If a longer run is needed, add more 9-
pin cable on the RS-422 end.
Installing MachineControl
Software
To install MachineControl, you can use the
Pro Tools Installer disc, or the MachineControl
Installer disc.
To install MachineControl software:
1
Insert the Installer disc into your computer.
2
Locate and and double-click the MachineCon-
trol installer application.
3
Follow the on-screen instructions to complete
installation.
4
When installation is complete, click
Finish
(Windows) or Close (Mac).
Authorizing MachineControl
MachineControl is authorized using the iLok
USB Smart Key (iLok), manufactured by PACE
Anti-Piracy, Inc.
The iLok is similar to a dongle, but unlike a don-
gle, it is designed to securely authorize multiple
software applications from a variety of software
developers.
This key can hold over 100 licenses for all of
your iLok-enabled software. Once an iLok is au-
thorized for a given piece of software, you can
use the iLok to authorize that software on any
computer.
iLok USB Smart Key
The iLok USB Smart Key is not supplied with
your plug-in or software option. You can use
the one included with your Pro Tools|HD
system, or purchase one separately.