DigiDesign MachineControl, Руководство пользователя

Страница: 27 / 60

Chapter 5: Serial Deck Control Mode (Configuration and Operation) 23
Session Settings for
MachineControl
Use the steps in this section to quickly configure
the basic session settings for MachineControl.
Basic Session Settings
Confirm the following settings for each session.
To configure a session for MachineControl:
1
Open an existing session or create a new one.
2
Choose Setup > Session .
3
In the Format section, do the following:
• Set a
Session start
time.
– and –
• Set the session
Timecode Rate
and
Feet+Frames Rate
.
Clock Source, Clock and Positional
Reference Settings
The Session Setup window provides selectors for
the system Clock Source, as well as Clock Refer-
ence and Positional Reference. These settings
must be configured based on the signal connec-
tions between Pro Tools, the SYNC peripheral,
and external devices.
To configure Clock Source and Reference settings:
1
Choose Setup > Session .
2
In the Format section, select a Clock Source (a
SYNC peripheral or a Pro Tools|HD audio inter-
face) from the
Clock Source
pop-up menu.
3
In the SYNC Setup section, select a Clock Ref-
erence
and
Positional Reference
.
4
In the SYNC Setup section, set the appropriate
Video Reference
and
Video In
formats.
Basic session settings in the Session Setup window
Session Start Time
Time Code Rate
Feet+Frames Rate
Video Ref and Video In format selectors
See the SYNC HD Guide for more information
on setting Clock Reference, Positional Refer-
ence, Video Reference, and Video In formats.
Video In format
Video Ref format