manualshive.com logo in svg

DigiDesign D-Command, Руководство пользователя

Поделиться
Скачать
DigiDesign D-Command Скачать руководство пользователя страница 77

Chapter 8: Transport and Navigation Controls

71

Mark In and Mark Out Switches

When Audition mode is off, the Mark In and Mark Out 
switches are used to define selection start and end during play-
back, or when using the Scrub/Shuttle wheel. 

When Audition mode is on, the Mark In and Mark Out 
switches play a range of audio around the current Edit selec-
tion. 

To move the selection start: 

With the transport stopped, hold the Mark In switch and turn 
the Scrub/Shuttle wheel. 

To move the selection end:

With the transport stopped, hold the Mark In switch and turn 
the Scrub/Shuttle wheel. 

To move the entire selection:

With the transport stopped, hold both the Mark In and Mark 
Out switches and turn the Scrub/Shuttle wheel. 

Locate Switches

The Locate switches move the Pro Tools transport to the des-
ignated location. 

Go To Start Switch

The Go To Start switch returns the playback cursor to the be-
ginning of the session. 

Go to End Switch

The Go To End switch moves the playback cursor to the end of 
the session.

Back Switch

The Back switch stops the Transport (if it is moving) and 
moves the playback cursor back (earlier in time) by the 
amount of time selected in Back settings pop-up in Pro Tools. 
You can also click repeatedly to move back multiple times. 

Forward Mode

Forward mode can be invoked by pressing Alt (Windows) or 
Option (Mac), and pressing the Back switch. 

Back & Play Switch

The Back and Play switch combines the function of the Back 
switch and the Transport Play switch. The playback cursor 
moves back by the amount of time selected in the Back set-
tings preference in Pro Tools.

If pre-roll is enabled, the pre-roll time will be observed in ad-
dition to the Back time if pre-roll is enabled. 

Forward & Play Mode

Forward & Play mode can be invoked by doing the following:

To move the playback location forward and begin playback:

„

Hold Alt (Windows) or Option (Mac) and press the Back and 

Play switch in the Transport section.

Instant Playback

The Instant Playback switch primes Pro Tools for playback, so 
that pressing Play will begin playback instantaneously. This 
switch can also be used during recording to put Pro Tools in 
Record Pause mode.

Locate switches

Go To Start

switch

Go To End

switch

Back

switch

Back & Play

switch

Instant

Playback

switch

Содержание D-Command









































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды