DigiDesign D-Command, Руководство пользователя

Страница: 51 / 136

Chapter 6: Channel Strip Controls 45
Miscellaneous Controls
The Miscellaneous Controls section includes Timeline, Assign,
Make Inactive, and Plug-in Automation controls.
Timeline Controls
Main Counter Switch
The Main Counter switch cycles through the time code dis-
play modes (Bars:Beats, Min.Secs, Time Code, Feet+Frames
and Samples) on the Main Time Scale display.
Link Edit and Timeline Switch
The Link Edit and Timeline switch toggles the Link Edit and
Timeline Selection command on and off. The switch is lit
when the selections are linked.
Edit/Timeline Switch and Indicators
The Edit/Timeline switch toggles the D-Command transport
function between the edit selection and the timeline selec-
tion. The indicators above the switch light to show which is
displayed. If Edit and Timeline Selections are linked, these val-
ues will be the same.
Assign Controls
The Assign controls are used to assign inputs, outputs, inserts,
and sends to channels. Each switch puts D-Command into a
temporary Assign mode in which elements are assigned or re-
moved from channels. The switch flashes while Assign mode
is in effect.
You can enter Assign mode while Pro Tools is playing back. To
confirm the assignment of inputs, outputs, and sends, the
transport must be stopped. You can, however, confirm the as-
signment of inserts during playback.
Assign Inputs Switch
The Inputs switch invokes Assign Inputs mode, in which the
bottom row of encoders shows channel inputs.
When assigning an input, the Select switch on the bottom en-
coder is used to navigate down through Input menu levels,
and the encoder knob is used to scroll through available
choices at each level:
• Input type (Interface or Bus)
• Individual inputs
The Bypass/Mute/Pre switch on the bottom encoder is used to
navigate back up the Input menu levels.
Assign Outputs Switch
The Outputs switch invokes Assign Outputs mode, in which
the bottom row of encoders shows channel outputs.
When assigning an output, the Select switch on the bottom
encoder is used to navigate down through Output menu lev-
els, and the encoder knob is used to scroll through available
choices at each level:
• Output type (Interface or Bus)
• Individual outputs
The Bypass/Mute/Pre switch on the bottom encoder is used to
navigate back up the Output menu levels.
Miscellaneous controls
Timeline controls
Timeline
controls
Assign
controls
Make Inactive
controls
Plug-in Automation
controls
Main Counter
switch
Link Edit and
Timeline switch
Edit/Timeline
Selection
switch and
indicators
Assign controls
Assign Inputs
switch
Assign Sends
switch
Assign Outputs
switch
Assign Inserts
switch