DigiDesign Command 8, Руководство пользователя

Страница: 46 / 68

Command|8 Guide 40
Closing Plug-in Windows
To close all plug-in windows:
„
Press OPT/ALT ALL+Plug-in (in the Windows
section).
Adjusting Plug-ins
A plug-in must be selected and targeted before
you can adjust its parameters from Command|8.
To target a plug-in for editing from Command|8, do
the following:
„
Select and open the plug-in using Com-
mand|8 Channel or Console views (see “Open-
ing Plug-ins” on page 39.
To target a plug-in window already open onscreen
(making it the Command|8 focus);
„
Click in the header area of an open plug-in
window (the blank gray area next to the stan-
dard plug-in controls at the top of the window).
Once an insert is targeted for editing, you can
adjust the displayed parameters, bank to other
plug-in pages to access other controls, and use
Flip mode to map plug-in parameters to the fad-
ers.
To adjust a plug-in parameter:
1
Select an insert for editing as described in
“Opening Plug-ins” on page 39.
2
Use the rotary encoder under each displayed
parameter that maps to a variable control (slid-
ers, knobs, and similar). Use the appropriate
channel Select switch to toggle on/off switches.
Bypassing Plug-ins
Command|8 provides the following ways to by-
pass inserts.
To bypass the currently focussed insert:
1
Select an insert for editing and display its con-
trols in the LCD.
2
Press Master Bypass.
To bypass a plug-in from Console or Channel views:
1
Use the Console or Channel view switches to
display all inserts (A–E) on all currently banked
tracks (Console view), or to display all inserts on
a single track (Channel view). See “Opening
Plug-ins” on page 39.
2
Press
a
/Ctl+Select on the channel corre-
sponding to the insert you want to bypass. Press
again to disengage bypass.
The switch LEDs light red to indicate bypassed,
green to indicate in (not bypassed), and alter-
nating red and green to indicate mixed states of
bypassed and un-bypassed plug-ins.
Navigating Plug-in Pages
To show other plug-in control pages:
„
Use the < Page > switches (in the Channel
View row below the LCD) to bank to the previ-
ous or next page of plug-in controls.