DigiDesign Command 8, Руководство пользователя

Страница: 40 / 68

Command|8 Guide 34
TrackPunch and Record Enabling Tracks
Before tracks can be punched in and out using
TrackPunch, they must first be TrackPunch en-
abled as well as record enabled. Command|8 fea-
tures for TrackPunch provide convenient and
flexible control of TrackPunch and record en-
able status.
To TrackPunch enable and record enable tracks:
1
Make sure TrackPunch mode is enabled.
2
Press the Rec switch to enter Record Enable
mode.
3
Press the channel Select switch for each track
you want to TrackPunch enable. A single press
TrackPunch enables and record enables the track
as explained previously.
4
Press the channel Select switch again. This
takes the track out of record enable but leaves it
TrackPunch enabled. Onscreen the track Record
button is lit blue
To TrackPunch enable tracks without record
enabling them:
1
Make sure TrackPunch mode is enabled and
the Transport is stopped.
2
Press Ctl/Channel Select to Track-
Punch enable that track.
3
To TrackPunch enable additional tracks, press
Ctl/Channel Select for each desired
track. Onscreen, the track record buttons flash
blue and red indicating they are both Track-
Punch enabled and record enabled.
To take tracks out of TrackPunch and record
enable:
1
Press Ctl/Select (Windows) or
a
/Ctl+Select (Mac) on each track. One press im-
mediately places the track in Record Safe mode.
2
Repeat to take the track out of Record Safe and
leave it not TrackPunch enabled or record en-
abled. Use the standard Pro Tools modifiers to
Apply to All (Opt/Alt All) or Apply to Selected
(Shift+Opt/Alt All). If some tracks are already
TrackPunch enabled, applying to all will first
take all tracks out of TrackPunch enable. Repeat
step 3 and all tracks will TrackPunch enable.
To take a track out of record enable but leave it
TrackPunch enabled:
1
Press the Rec switch.
2
Press the corresponding Channel Select
switch.
Punching In and Out Using TrackPunch
To punch on individual tracks using TrackPunch:
1
Configure Pro Tools for TrackPunch recording
as explained in the Pro Tools Reference Guide .
2
TrackPunch and record enable tracks as ex-
plained previously.
3
Press the Transport Record switch to arm
Pro Tools for recording.
4
Begin playback.
5
Use the channel Select switches to punch in
and out on individual tracks.
Hold Opt/Alt All+Shift/Add to TrackPunch
enable all selected tracks.