DigiDesign 003 Family, Руководство по установке

Страница: 45 / 191

Chapter 5: 003 Top Panel 35
chapter 5
003 Top Panel
003 Operating Modes
003 can be in any of five states when it is on:
• Standby mode
• Pro Tools mode
• MIDI mode
• Third-Party Software mode
• Utility mode
Standby Mode
003 is in this mode when you first power on the
unit, waiting for you to launch Pro Tools (or an-
other supported application).
In Standby mode, the unit displays “003 Of-
fline” in the top row of the 003 display and the
Monitor Mute switch is enabled (lit).
In Standby mode, the Monitor section I/O ports
are available, without having to power on the
computer.
While in Standby mode, you can also switch to
MIDI mode to control external MIDI devices
(without having to power on the computer).
However, you cannot use 003 as a standalone
MIDI router; you must route MIDI through soft-
ware.
Pro Tools Mode
003 is in this mode when the 003 unit is con-
nected to a computer and Pro Tools LE software
is running.
If Pro Tools is running and no Pro Tools session
is open, the unit normally displays “Open or
create a new session.” When a session is being
launched, the display changes to “Loading a ses-
sion.”
When a Pro Tools session is open, the unit mir-
rors the on-screen controls. 003 faders, transport
switches, rotary knobs, and switches control the
corresponding elements in Pro Tools. You can
also use 003 MIDI ports as you would those on a
standard MIDI interface.
In Pro Tools mode, the Monitor section and
MIDI I/O ports are available with a session open
or closed.
If no session is open and a Workspace
browser is open and being used for audition-
ing an audio file, the unit displays “Work-
ing.”