manualshive.com logo in svg

DigiDesign 003 Family, Руководство по установке

Поделиться
Скачать
DigiDesign 003 Family Скачать руководство пользователя страница 26

003 Family Setup Guide

16

Pro Tools Demo Session

The Pro Tools LE Installer disc includes a demo 
session that you can use to verify that your sys-
tem is working.

The demo session for Pro Tool LE is named “Fil-
tered Dream.”

To install the demo session:

1  

Insert the Pro Tools LE Installer disc into your 

DVD drive.

2  

On the Pro Tools LE Installer disc, locate and 

open the Additional Files\Pro Tools Demo Ses-
sions Installer folder.

3  

Double-click 

LE Demo Session Setup.exe

.

4  

Follow the onscreen instructions.

5  

When prompted, select your audio drive as 

the install location and click 

Next

 to begin the 

install.

6  

When installation is complete, click 

Finish

.

Connecting FireWire Drives

Connect FireWire hard drives directly to a 
FireWire port on your computer. 

The FireWire ports on 003 family interfaces do 
not pass data when they are powered off. If you 
daisy-chain FireWire devices from your com-
puter, it is best to connect FireWire hard drives 
directly to your computer and not to the 003 
family interface. This will prevent hard drive er-
rors and data loss in case your 003 family inter-
face is powered off.

To connect a FireWire hard drive, do one of the 
following:

If your computer has more than one FireWire 

port, connect the FireWire hard drive to one 
FireWire port on your computer, and connect 
your 003 family interface to another FireWire 
port on the computer. 

– or –

If your computer has only one FireWire port, 

connect the FireWire hard drive directly to your 
computer and then connect your 003 family in-
terface to an available FireWire port on the 
drive.

Before installing the demo session to your 
audio drive, make sure the drive is config-
ured as described in “Formatting an Audio 
Drive” on page 158.

The demo session can be opened by double-
clicking the Filtered Dream.ptf file (located 
in the Filtered Dream Demo Session folder).

Do not connect a FireWire hard drive to the 
second FireWire port on the back panel of 
your 003 family interface.

Connecting your 003 family interface to 
your computer through a FireWire hard drive 
does not support maximum track count. To 
achieve the maximum track count, purchase 
a PCI/PCMCIA/ExpressCard to increase the 
number of FireWire ports on your computer. 

For information on supported PCI/PCM-
CIA/ExpressCard FireWire options, visit the 
Digidesign website (www.digidesign.com).

Содержание 003 Family
































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды