DigiDesign 003 Family, Руководство по установке

Страница: 111 / 191

Chapter 11: Pro Tools Mode with 003 101
4
Do the following for each parameter mapping
you want to change:
• In the plug-in window, click the new
plug-in parameter. The parameter name ap-
pears in the plug-in window Parameter
menu.
• On the control surface, page to the encoder
or Select switch (or in Flip mode, fader)
where you want to change the mapping,
and turn the encoder, press the switch, or
touch the fader.
5
Take the plug-in out of Learn mode.
To remove parameter mapping from a plug-in map:
1
Open the plug-in whose custom map you
want to change.
2
Choose the map you want to change from the
plug-in window Map Preset pop-up menu.
3
Put the plug-in into Learn mode. 003 displays
the plug-in controls
4
Do the following for each parameter mapping
you want to remove:
• Make sure the Parameter menu displays
No
Control
.
• On the control surface, page to the encoder
or Select switch (or in Flip mode, fader)
where you want to remove the mapping,
and turn the encoder, press the switch, or
touch the fader.
5
Take the plug-in out of Learn mode.
Navigating and Editing Values
in Entry Fields
You can navigate and edit numerical values in
Pro Tools windows (such as Selection Start, End,
and Length, or Pre- and Post-Roll in the Edit or
Transport windows) with the Arrow keys.
To navigate between fields in the Edit window,
Transport window, or a plug-in window:
Press the Left or Right Arrow key.
To change a value in a selected field:
Press the Up or Down Arrow key.
Working with Tracks
Navigating the New Track Dialog
when Creating a New Track
You can navigate the New Tracks dialog with
the Arrow keys.
To increase or decrease the number of tracks:
Press the Up or Down Arrow key.
To scroll through the track types:
Hold Command/Ctrl and press the Up or
Down Arrow key.
To scroll through the track formats:
Hold Command/Ctrl and press the Left or
Right Arrow keys.