DigiDesign 003 Family Скачать руководство пользователя

Страница: 176 / 191

003 Family Setup Guide

166

Common Issues

Pro Tools Won’t Launch

Problem

When you double-click the Pro Tools applica-
tion or a Pro Tools session file, Pro Tools doesn’t
launch, or displays an error message.

Possible Solutions

Check to be sure your computer has the re-

quired amount of RAM to launch Pro Tools.

Try a complete restart. Turn off your audio in-

terfaces, computer peripherals and your com-
puter, and then turn them on again in the
proper sequence.

If you tried to launch Pro Tools by double-

clicking a Pro Tools session file, do the follow-
ing:

• Close any error message.

• Double-click the Pro Tools application.

• In Pro Tools, choose

File > Open Session

open the session.

Reinstall the Pro Tools application, using the

Pro Tools Installer disc.

Audio Interface Is Not Recognized

Problem

When you launch Pro Tools it does not recog-
nize an audio interface, or a connected audio in-
terface is not available.

Possible Solutions

Turn off your computer and check to be sure

your cables are properly and securely connected
to your computer and to your audio interface

Verify that your Hardware Setup dialog set-

tings are correct.

Performance Factors

There are several conditions that may adversely
affect the performance of Pro Tools. These in-
clude:

Network Connections

Close any network con-

nections unless you are using them for network
interchange of audio data.

Background Applications

Any software utilities

that run in the background or generate disk ac-
tivity, such as virus protection, disk optimiza-
tion, or file savers, should be turned off or re-
moved.

Screen Savers

Screen saver software should be

completely disabled on your computer before
running Pro Tools.

Power Saver Features

Some automatic power

saver features, such as those that spin down the
system hard drive, can affect Pro Tools perfor-
mance. These features should be turned off.

Содержание 003 Family
































































































































































































Результаты поиска

Содержание 003 Family

Отзывы:

Похожие инструкции для 003 Family

Бренды по названию

Популярные бренды

DigiDesign 003 Family, Руководство по установке

Результаты поиска

Содержание 003 Family

Отзывы:

Похожие инструкции для 003 Family

Бренды по названию

Популярные бренды