Configure the XBee Wi-Fi RF Module using Digi Remote Manager
Use XCTU to enable Remote Manager
XBee Wi-Fi RF Module User Guide
90
Use XCTU to enable Remote Manager
To enable an XBee Wi-Fi RF Module connected to XCTU for Remote Manager:
1. Select the device in the
Radio Modules
list.
2. In the
Working area
of XCTU, type 1 in the
DO
(Device Options) command field; this enables
Remote Manager for the device.
3. Click the
Write
button.
Configure the device
If your XBee devices are connected to Remote Manager, you can query and configure the XBee Wi-Fi
RF Module through Remote Manager. To do this:
1. Log in to Remote Manager.
2. Click the
Device Management
tab.
3. Click the
XBee Networks
tab.
4. Double click the device you want to configure.
5. Click
Configuration
. A list of AT command types displays.
6. Click the category of AT commands that you want to modify,
Network Settings
for example.
7. Change the settings of the appropriate AT command(s).
8. Click the
Refresh
button to query the current configuration.
9. Click the
Save
button to save the current configuration changes. If the changes are valid,
Remote Manager writes them to non-volatile memory and applies them.
10. If you want to apply these changes later, click the drop-down arrow on the
Save
button and
select
Schedule
.
11. The
Save Device Properties
dialog allows you to schedule changes to connected devices to be
either:
a.
Immediate
(default)
b.
One-Time
: Schedule a one-time reboot at a specified date and time.
c.
Recurring
: Set a recurring reboot schedule, with start and end dates and times, as
well as frequency.
d.
Schedule Offline
: Queue device reboot to occur the next time this device connects
to Remote Manager.
12. Click the
Export
button to export the device’s settings; the
Export Properties
dialog appears.
13. Choose the
Export all
option (default) or
Export all except unique network and device
identity properties
.
14. Click
OK
. A message appears, asking whether you want to open or save the downloaded file.
