Digi PortServer II, Руководство пользователя

Страница: 249 / 277

90030500B Troubleshooting Page 229
5) <name>: Menu access enabled with no menu selected.
The user was configured for access via a menu but no menu is defined.
6) <name>: Menu number references undefined menu
The user is configured to use a menu that is not defined.
7) <name>: Syntax error in AccessTime string.
The user is configured for access only at certain times or on certain days, and there is
a syntax error in the configuration.
8) <name>: Invalid subnet mask for dynamic/negotiated IP address.
For negotiated or dynamic IP addresses, WAN users must have an IP mask of
255.255.255.255.
9) <name>: Negotiated IP address can only be used with PPP.
It is not possible to used address negotiation with the currently configured protocol.
Only the PPP protocol supports address negotiation.
10) <name>: Keepup filter ineffective with no idle timeout.
If you do not configure an idle timeout, there is no requirement for a keepup filter (the
keepup filter resets the idle timer).
11) <name>: Bringup/Keepup/Passpacket/Logpacket filter not found.
One of the filters configured in the user's profile was not defined by set filter.
12) <name>: Must specify a device for outgoing connections
You cannot enable dial out without first defining a device to dial out on.
13) <name>: Device name not found in device table
The user's profile is configured to use a device that is not listed in the Device Table.
14) <name>: No frdlci information for port <port> dlci <dlci>
You must define an entry in the frdlci table to correspond with the port/dlci pair for
this user.
15) <name>: Port <port> not configured for frame relay.
Use the set frame command to enable Frame Relay for this port.