Digi PortServer II, Руководство пользователя

Страница: 152 / 277

Page 132 Configuring Modem Connections 90030500B
Escape commands
You can use any of the following escape commands in
E
,
M
, and
[]
command strings:
Special characters
The following characters have special meaning in
%
N phonenumber strings (see
Escape Commands above), and are replaced with corresponding strings from the
set
chat
command:
^c The control character derived by the logical and-ing of ASCII character c
and octal mask 037. This is the character transmitted by a standard
ASCII keyboard when the Ctrl key is held down and the character
c is
depressed.
\c Standard C language escapes: \b (backspace), \f (form feed), \t (tab),
\n (new line), \\ (backslash) and \r (return).
\ nnn
The octal byte value nnn.
\x
hh The hexadecimal byte value hh.
% p Parameter substitution where p is an integer from 1 to 9. Parameters 1-9
are provided by the
set user parameter options for login scripts or the
set device options for dialer scripts. The parameter is substituted for
the % p expression.
% n Phone number substitution where the number provided in the User Table
is substituted for
% n
%
N
Phone number substitution with special character translation. The
numbers from the system table are substituted for
% N after special
characters are replaced.
* (star) Generates a tone equivalent to dialing * on a touch-tone telephone.
#
(pound or hash) Generates a tone equivalent to dialing # on a touch-tone
telephone.
= (pause) Pause 2 seconds.
w (wait) Wait for secondary dial tone.
-
Completely ignored and not passed to modem.