System status and port logging
Introduction
Digi CM User Guide
34
Introduction
The Digi CM unit provides four options for saving system and port logs:
▪
A syslog server
▪
An NFS server
▪
A compact-flash card
▪
The Digi CM unit ’s memory
When memory is selected as the storage location, log files are saved to volatile memory, meaning
files are lost when the power is turned off. To use a syslog server, an NFS server, or a compact-flash
card, you must first enable the devices and enter the required information. Compact-flash cards
must be installed before they can be enabled and configured for logging purposes.
System logs track events such as logins, authentication failures, system configuration changes, and
more. Port logs, on the other hand, document the data flow through the serial ports. This chapter
outlines locations for viewing the system and port logs.
System status & log
For basic system information click
System status & log
. The parameters for the system status are
described in the following list.
System Information
Model No.
- Identification of Digi device
Serial No.
- Serial number of product
F/W Rev.
- Revision number of firmware
B/L Ver.
- Bootloader version
MAC address
- MAC address of Digi device
Uptime
- Amount of time since last reboot
Current time
- Time based on time set for Digi device
System logging
- Status of system logging either Enabled or Disabled
Send system log by email
- Condition for notification:
PC card type
- Description of PC card if configured
PC card model
- Model of PC card if configured
Power status
- Dual power ( 1 - Normal , 2 - Normal )
IP Information
IP mode
- Method for setting IP address either Static, DHCP, PPPoE, or Disable
IP expiration
- When the IP address will expire
IP address
- Actual IP address
Subnet mask
- Address of the Subnet mask
Gateway
- Address of the Gateway
Receive/Transmit errors
- Number of errors from receiving or transmitting
Primary DNS
- IP address of the primary DNS
Secondary DNS
- IP address of the secondary DNS
Содержание Digi CM 16
