Port clustering
Configure port clustering
Digi CM User Guide
135
Base destination port
- The physical port numbers of the slave device.
Note
However, you can change the base source port number to another number and the rest of
the ports on the unit will be sequentially numbered from the base source port.
Access the cluster ports
You can connect to the slave port using the web, Telnet or SSH client. You can access the port access
menu or custom menu of each slave device or connect directly to each slave port.
Web Access
1
Click
Clustering
>
Connection
> Port number.
2
Log in to the port.
3
Enter the port escape sequence (listed on page).
Telnet
1
Telnet to the IP and the port number of the device.
telnet 143.191.3.9 7101
2
Login and enter your password.
root
dbps
3
Enter the port escape sequence (listed on page).
Содержание Digi CM 16
