13
• Capturing Peak Values on IR+DMM mode
1. To activate the peak mode, press the soft key labeled
4
, and
display Peak max value.
2. If the Meter is already in the peak function, then press the
4
key to display Peak min value, then Press the
4
key to
display current measurement value. Next press
4
key again
to display peak max value.
3. Press and hold the
4
key for more than 1 second to turn off
peak.
Settings Menus
Using Settings Menus
• Press
MENU
button to open the Settings Menus, as shown here:
• Press
UP/DOWN
button to select menu item or
change the value of current focus item.
• Press
RIGHT/MENU
button to enter the submenu
or set focus on the current selected item. Press
LEFT
button to return to the previous menu.
• To exit settings menus, press
MODE/RANGE/HOLD/IR
button or press
LEFT
button in root menu.
Setting details
• Palette mode
Thermal imager has five kinds of palettes, such as:
Press
RIGHT/MENU
button to select one of the display color palettes.
Temp Unit
Press
RIGHT/MENU
button to set focus on this option and the color of option value will
change to black
°
C . In focus state, use the
RIGHT/MENU
button to toggle
°
C,
°
F, and K.
Use
LEFT/RIGHT/MENU
button to exit focus state and the color of option value will change
to white
K
.
Measure
Press
RIGHT/MENU
button to enter measure menu.
Two selections are available: HOT POINT and COLD POINT.
Press
RIGHT/MENU
button to set your select item on or off.
• Hot point: This option enables thermal imager to automatically
detect the highest temperature point.
• Cold point: This option enables thermal imager to automatically
detect the lowest temperature point.
Emissivity
• Press
RIGHT/MENU
button to set focus on this option. In focus state, use
UP/DOWN
button
to increase or decrease emissivity's value, use
LEFT/RIGHT/MENU
button to exit focus
state. The available range is 0.01 to 0.99 in 0.01 steps.
