Digger Specialities Turning Point, Инструкция по установке и эксплуатации

Страница: 8 / 20

TM
TM TM
TM TM TM
8
Gate Installation Instructions
Turning Point Gates
Gate Installation Instructions
- 5 -
13. For double drive systems
a. Install the bottom bracket on the
second support location by using a
string level and attaching the
bottom hinge so that the bottom
hinge on the second gate is level
with the bottom hinge on the first
gate
b. Follow instructions 3 through 12.
14. Adjusting the gate with top adjustable
hinge mount. (see Figure 8)
a. To raise the outer edge of the gate,
turn the top adjustment counter-
clockwise.
b. To lower the outer edge of the
gate, turn the top adjustment
clockwise. (see Figure 8)
c.
15. Gates are engineered to rotate 90 degrees.
To have gates that open a different amount
of degrees requires a special drive option.
16. Follow instructions in section B. Control
Box Installation Prior to testing the gates.
(step 8 has the positioning method)
Top
Adjustment
Bolt
(Counter
Clockwise
raises outer
edge of Gate)
Figure 8
Turning Point Gates
Gate Installation Instructions
- 5 -
13. For double drive systems
a. Install the bottom bracket on the
second support location by using a
string level and attaching the
bottom hinge so that the bottom
hinge on the second gate is level
with the bottom hinge on the first
gate
b. Follow instructions 3 through 12.
14. Adjusting the gate with top adjustable
hinge mount. (see Figure 8)
a. To raise the outer edge of the gate,
turn the top adjustment counter-
clockwise.
b. To lower the outer edge of the
gate, turn the top adjustment
clockwise. (see Figure 8)
c.
15. Gates are engineered to rotate 90 degrees.
To have gates that open a different amount
of degrees requires a special drive option.
16. Follow instructions in section B. Control
Box Installation Prior to testing the gates.
(step 8 has the positioning method)
Top
Adjustment
Bolt
(Counter
Clockwise
raises outer
edge of Gate)
Figure 8
Turning Point Gates
Gate Installation Instructions
- 5 -
13. For double drive systems
a. Install the bottom bracket on the
second support location by using a
string level and attaching the
bottom hinge so that the bottom
hinge on the second gate is level
with the bottom hinge on the first
gate
b. Follow instructions 3 through 12.
14. Adjusting the gate with top adjustable
hinge mount. (see Figure 8)
a. To raise the outer edge of the gate,
turn the top adjustment counter-
clockwise.
b. To lower the outer edge of the
gate, turn the top adjustment
clockwise. (see Figure 8)
c.
15. Gates are engineered to rotate 90 degrees.
To have gates that open a different amount
of degrees requires a special drive option.
16. Follow instructions in section B. Control
Box Installation Prior to testing the gates.
(step 8 has the positioning method)
Top
Adjustment
Bolt
(Counter
Clockwise
raises outer
edge of Gate)
Figure 8