6. PROGRAMMING
In order to program the LEIT1
™
, you must
first let the unit sit out in the light to charge. In
bright light conditions (full sun) this will take under 30 minutes.
In shaded conditions this could take up to 2 hours.
This section explains the programming features, and the steps necessary to assign irrigation
schedules. To program the controller press the
to select the desired programming mode,
the
to make the entry flash and the
buttons to change the value.
NOTE:
Only a flashing value can be changed.
NOTE:
If the last data entered stops blinking, press
again to resume.
6. SETTING
TIME AND DATE
30-9XX ADAPTER
WATER FLOW
7
