10. SETTING WATERING RUN TIMES
Note:
If you have already set a SimpleSmart
™
ET preset (example: SP02) and then change
the run time, your SimpleSmart
™
program will be turned OFF. You must reactivate the
SimpleSmart
™
programming each time you adjust your run time (see section 10).
This setting determines the length of time the LEIT1
™
smart controller will allow the valve to
remain open (duration is from 1 minute up to 6 hours). For example, setting watering run time
to 10 minutes on certain days of the week will program the controller to turn the water on for
10 minutes on each of the days chosen and at every start time selected.
To set the watering run time :
1. Press the
button until the icon appears and OFF or the last run time setting
appears.
2. Press the
button and OFF (or the last run time programmed) appears with hours
blinking.
3. To set a desired watering run time in hours, press
or
and select the number of
hours.
4. If only watering duration in minutes is required, press
to skip the hour digit, and the
minutes will start blinking.
14
