background image

 

18. WARRANTY

DIG CORPORATION warrants these products to be free from defects in material and workmanship for a period of three years 
from date of purchase. This warranty does not cover damage resulting from accident, misuse, neglect, modification, improper 
installation or subjection to line pressure in excess of 80 lbs. per square inch (5.5 BAR). This warranty shall extend only to the 
original purchaser of the product for use by the purchaser. 
The obligation of DIG CORPORATION under this warranty is limited to repairing or replacing at its factory this product which 
shall be returned to the factory within three years after the original purchase and which on examination is found to contain 
defects in material and workmanship.

 DIG CORPORATION SHALL IN NO EVENT BE LIABLE FOR ANY INCIDENTAL OR 

CONSEQUENTIAL DAMAGES OF ANY KIND; THE SOLE OBLIGATION OF DIG BEING LIMITED TO REPAIR OR REPLACEMENT 

OF DEFECTIVE PRODUCTS. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR 

CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

Unattended use for prolonged periods without inspection to verify proper operation is beyond the intended use of this product, 
and any damage resulting from such use shall not be the responsibility of DIG CORPORATION. There are no warranties, which 
extend beyond the description on the face hereof. In the case of purchase of the product for use other than, for irrigation 
purposes, DIG CORPORATION hereby disclaims any implied warranties including any warranties of merchantability and 
fitness for a particular purpose. In the case of the purchase of the product for personal, family or household purposes, DIG 
CORPORATION disclaims any such warranties to the extent permitted by law. To the extent that any such disclaimer or implied 
warranties shall be ineffectual, then any implied warranties shall be limited in duration to a period of three years from the date 
of the original purchase for use by the purchaser. Some states do not allow limitation on how long an implied warranty lasts, so 
the above limitation may not apply to you.
In order to obtain performance under this warranty, the unit must be returned to the factory, along with proof of purchase 
indicating original date of purchase, shipping prepaid, addressed as follows:
DIG CORPORATION, 1210 Activity Drive, Vista, CA 92081. Repaired or replaced units will be shipped prepaid to the name and 
address supplied with the unit returned under warranty. Allow four weeks for repairs and shipping time. Repair of damaged 
units not otherwise within warranty may be refused or done at a reasonable cost or charge at the option of DIG CORPORATION.
This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state.
Should you encounter any problem(s) with this product or if you do not understand its many features, please refer to this 
instruction manual first. If further assistance is required, DIG offers the following customer support:

TECHNICAL SERVICE USA

•  DIG’s Technical Service Team is available to answer questions in English and Spanish from  

8:00 AM to 5:00 PM (PST) Monday-Friday (except holidays) at 800-344-2281or 760-727-0914.

•  Questions in English and Spanish can be emailed to [email protected] or faxed to  

760-727-0282.

•  Specification documents and manuals are available for downloading in English and Spanish  

at www.digcorp.com.

27

Содержание LEIT-1





























Отзывы: