•
9
•
PROBLEM
POSSIBLE CAUSE
REASON/SOLUTION
The Portable Power won’t
power my 12V device.
The 12V device is not
turned on.
The Portable Power’s battery
is not charged.
The 12V device draws more
than 15A or has a short circuit.
Turn on the 12V device.
Check the battery charge
status by pressing the button
on the front of the unit. See
DIGITAL DISPLAY section.
Contact a qualified service
technician, to replace the fuse.
The battery in the Portable
Power won’t hold a charge.
The battery is bad (will not
accept a charge).
Replace the battery.
The Portable Power’s alarm
is on.
Connections are reversed.
Disconnect the jump starter
and reverse the clamps.
The inverter is on, but the
display only shows
err
.
The jump starter battery is not
fully charged.
The device is drawing more
than 400W or has a short circuit.
Recharge the unit.
Use only devices that draw
less than 3.3 amps of AC
current.
BEFORE RETURNING FOR REPAIRS
If the above solutions do not eliminate the problem,
or for information about troubleshooting or replacement parts,
call toll-free from anywhere in the U.S.A.
1-800-732-7764
7:00 am to 5:00 pm CT, Monday through Friday
REPLACEMENT PARTS/ACCESSORIES
Male-to-male accessory cable ................................................................................ 94500109
Air compressor accessory kit (3 hose adapters)................................................. 0099000599
