DIEBOLD AccuVote-OS 1.94, Руководство по оборудованию

Страница: 63 / 73

Parts List
© Diebold Election Systems, Inc. 2002 AccuVote-OS Hardware Guide 55
This connector is used for testing the main serial port of the AccuVote-
OS unit.
541-1111 Internal Modem Power Cable (2400)
This is the special cable that powers the modem from a connection on
the CPU board.
541-1121 Internal Modem Power Cable (1440)
This is the special cable that powers the modem from a connection on
the CPU board.
541-2211 LCD Interface Cable
This fourteen-conductor ribbon cable connects the LCD to the CPU
board.
541-2311 Reader Interface Cable
This twenty-conductor ribbon cable connects the reader to the CPU
board.
621-3311 Diagnostic Test Ballot Cards (Type 3)
A package of twenty-five special cards for use in testing whether the
Accu-Vote unit is reading all of the potential voting positions on the ballot
cards.
621-6111 Demonstration Test Ballot Cards
A package of twenty-five demonstration ballots for use in testing whether
the Accu-Vote unit is reading marks on ballot cards during a test election.
These ballots can be used with a test memory card (641-2111) loaded
with the demonstration ballot card data.
641-2111 Test Memory Card
A memory card containing pre-loaded data that is recognizable by the
Accu-Vote ballot processing unit. This memory card is used to test
whether or not a problem exists in a test election mode using the
demonstration test ballot cards (621-6111)
721-1111 ROM Set (64K x 8)
64KB EPROM chip(s). This chip(s) would be programmed with the
firmware.
6.2. Ballot box unit parts list
Part # Part Name and Description
445-1111 Deflector Motor Mounting Hardware Kit
This motor moves the ballot deflector. This part has a cabling harness
attached to it which connects to the ballot box cable. This part does not
include the mounting hardware (453-7111).
453-7111 Deflector Motor Mounting Hardware Kit
This kit consists of screws for mounting the ballot box deflector motor to
the motor mount bracket and two plastic tie straps for anchoring the
slack cable.
453-7121 Ballot Box Cable Mounting Hardware Kit