Mechanical Combination Lock
This lock requires a combination to be entered manually through the lock dial.
When the code is successfully entered, the lock dial is turned to the right to
release the lock bolt. Then the handle can be turned to open the safe. Refer to
Section 3.13 for the procedure to open the mechanical combination lock.
Safe Opening Handle
Safe opening handles are present with single mechanical combination locks and
with electronic combination locks. Safe opening handles are used to release the
safe door after you enter the correct combination on the mechanical combination
lock or electronic combination lock keypad.
Self-closing Feature for Safe Door
If the safe has an electronic combination lock, there is a self-closing feature that
closes the door bolt work and handle automatically when the safe door is closed.
In the past, the safe door could close, but the bolt work and door handle were not
closed if the handle was not turned to the closed position. Now, when the safe
door closes, the safe door bolt work closes and the handle turns automatically. To
reopen the safe door, the combination must be reentered.
3.11 Opening and Closing Safe Doors with Electronic Combination Locks
3.11.1 Opening the Safe Door
Perform the following steps to open safe doors with an electronic combination
lock.
NOTE
If the electronic lock of the terminal has the remote access
feature, a remote access signal may be required to complete
this procedure. Follow the procedures of your institution for
the remote access feature.
1. If an optional mechanical key lock is present, insert the key into the
mechanical keylock slot. Turn the key clockwise 180°.
2. Enter the combination of the lock through the lock keypad to unlock
the lock bolt (refer to the appropriate lock operating guide listed in
Appendix A for information on entering the combination of your lock).
3. Turn the safe handle counterclockwise until it stops. See Figure 3-12.
4. Open the safe door, and complete all maintenance (refer to the appropriate
maintenance manuals listed in Appendix A for information about the
maintenance procedures for your terminal).
3-23
Copyright ©Diebold, Incorporated (7/2015, 3/2017) - All Rights Reserved
Copyright ©Diebold Nixdorf (2020) - All Rights Reserved
TP-821810-001C
