3.9
Accessing the Coin Dispenser
Perform the following steps to access the coin dispenser tray.
1. Open the upper chassis rear door (refer to Section 3.2.1).
2. If the local access keypad is present, enter a valid pass code on the local
access keypad.
3. Release the latch for the main tray, and use the main tray handle to extend
it to service position (see Figure 3-10).
The coin dispenser is now accessible.
4. Perform the necessary maintenance activity. Refer to the module
operating guide listed in Appendix A for specific maintenance procedure
for the module.
5. Push the coin dispenser tray back into the terminal until it latches securely
in place.
6. Close the upper chassis rear door (refer to Section 3.2.2).
3-20
Copyright ©Diebold, Incorporated (7/2015, 3/2017) - All Rights Reserved
Copyright ©Diebold Nixdorf (2020) - All Rights Reserved
TP-821810-001C