3.8
Accessing the Card Reader and the Receipt Printer
Perform the following steps to access the card reader and the receipt printer.
1. Open the upper chassis rear door (refer to Section 3.2.1).
2. If the local access keypad is present, enter a valid pass code on the local
access keypad.
3. Release the latch for the printer tray and use the handle to extend the
printer tray (see Figure 3-9).
4. Perform the necessary maintenance activity. Refer to the module
operating guides listed in Appendix A for specific maintenance
procedures for these modules.
5. Push the printer tray back into the terminal until it latches securely in
place.
6. Close the upper chassis rear door (refer to Section 3.2.2).
3-18
Copyright ©Diebold, Incorporated (7/2015, 3/2017) - All Rights Reserved
Copyright ©Diebold Nixdorf (2020) - All Rights Reserved
TP-821810-001C