MXS-9100 Optical Switch Rackmount Operation Manual
91592 Rev. A2
June 21, 2019
21
ROUTe:SCAN:OUT? [n]
This command will return the input channel for any given output, [n].
Examples:
ROUTe:SCAN:OUT? 1
If output channel 1 is connected to input channel 2, this
command will return 2.
ROUTE:SCAN:OUT? 2
If output channel 2 is connected to input channel 4, this
command will return 4.
ROUT:SCAN:OUT? 3
If output channel 4 is connected to input channel 1, this
command will return 1.
ROUTe[i]:SCAN:PREV
This command sets input channel
i
to the previous sequential output channel.
If the input channel is already positioned at output channel 0, this command will generate a device
error.
Examples:
ROUT3:SCAN:PREV
If input channel 3 is connected to output channel 2, this
command connects input channel 3 to output channel 1.
ROUTE2:SCAN:PREV
If input channel 2 is connected to output channel 1, this
command connects input channel 2 to output channel 0
(parked).
ROUT1:SCAN:PREV
If input channel 1 is connected to output channel 9, this
command connects input channel 2 to output channel 8.
ROUTe[i]:SCAN:SYNChronous?
This command always returns
"ON.” This switch module always changes position synchronously.
ROUTe[1..n]:SCAN:SYNChronous
This command is not supported. This switch module does not support asynchronous operations.
SNUMber?
This command returns the switch module serial number.
Examples:
SNUM?
Both examples query the serial number of the switch module.
SNUMBER?
