Dickey-John Seed Manager SE, Руководство оператора, Страница: 3 / 73

OPERATOR'S MANUAL
INTRODUCTION/ 1
Dj SEED MANAGER® SE PLANTER MONITOR
BENCHMARK Series®
11001-1218-200112 Rev A
A. SYSTEM
OVERVIEW
The Seed Manager® SE System offers
features such as the ability to monitor up
to ninety six (96) seed or material flow
rows, two (2) Fan (RPM) inputs, three (3)
Shaft Speed (RPM) inputs, two (2)
Pressure inputs, seven (7) hopper level
inputs, and a Ground Speed input. It is
compatible with DICKEY-john Standard
and Hi-Rate seed sensors and Recon
Flow sensors. The monitor will store all
implement configuration data in nonvola-
tile memory, retaining information even
when disconnected from the tractor
battery. Figure 1 shows the Seed
Manager® SE console.
B . SWITCH
OVERVIEW
The switches are used to control system
power, select the mode of operation, and
enter implement configuration constants.
To help distinguish between switch
names and display messages in the text
of this manual, switch names are always
shown in italicized print. An overview of
the switches follows:
INTRODUCTION
START
STOP
RESET
SET
SELECT
1 2 3 . . .
l l l l
1 2 3 ...
1 2 3 4 5
Figure 1
Seed Manager® SE Console
®