TELETEXT and SUBTITLES
TEXT
DIRECT ACCESS
TO THE ITEMS
Press:
You will obtain :
Enter the number of the page required using the 0 to 9 up/down. Example:
page 120, enter 120. The number is displayed top left, the counter turns and
then the page is displayed. Repeat this operation to view another page. If
the counter continues to search, this means that the page is not
transmitted. Select another number.
Coloured buttons correspond to the colours at the bottom of the screen. The
4 coloured keys are used to access the items or corresponding pages. The
coloured areas flash when the item or the page is not yet available.
SELECTING A PAGE
This is used to call or exit teletext modes during ATV reception. The
summary appears with a list of items that can be accessed. Each item has
a corresponding 3 digit page number. If the channel selected does not
broadcast teletext, the indication 100 will be displayed and the screen will
remain blank (in this case, press the CH+ or CH- buttons to check another
text page,or else exit teletext and select another channel).
Teletext is an information system broadcast in certain countries which can be consulted like a
newspaper. It may also offer access to subtitles for viewers with hearing problems or who are not
familiar with the transmission language (Refer to your local TV guides or internet program lists to
determine if Teletext is used in your area.)
SUBTITLE
Press this button to select the available sub-title languages during DTV
reception (if any), and to select Subtitle On or Off.
REMOTE CONTROL / GETTING STARTED
-14-
Getting Started :
Once you have connected your TV antenna and other AV playback equipment (eg. CD, DVD, Blu-ray
player) to the appropriate input sockets on the rear and side of the TV, you will need to be comfortable
with selecting several basic operations before setting up your TV using the Menu system.
Firstly, the TV has two power modes – Standby and On. In Standby mode, the TV is powered up, but
awaits a "power On" command from either the Remote Control or from the Standby push-button located
on the lower right-hand side of the TV.
To switch the TV from off into Standby mode, activate the main On/Off rocker switch located at the bottom
mid-right side of the TV, and wait for the Red power indicator on the bottom right of the TV to light up. Then,
press the red power button on the Remote Control to fully activate the TV (ie. move from Standby to On
mode). The power LED on the front of the TV will change from Red to Green colour when the TV is fully
powered up, and after approx 10 seconds the screen will become active and can be commanded using
the Remote Control.
GETTING STARTED