Diamond RM32 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 39

Diamond RM32 Скачать руководство пользователя страница 12

1.10

USER CHARACTERISTICS

The user of the oven must be an adult, responsible person with all
necessary technical knowledge for the machine’s ordinary maintenance,
such as its daily cleaning.
Make sure to keep children and unauthorized people away from the
machine while it is operating.

1.11

TECHNICAL ASSISTANCE

The Manufacturer is able to resolve any problems regarding use and
maintenance of the machine for its entire lifespan.

The central headquarters can provide information about the nearest
authorized assistance centre.

1.12

SPARE PARTS

Use only original spare parts.
Do not wait until components are worn out before replacing them.
Replacing a worn component before breakage helps to prevent injuries
deriving from accidents caused by unexpected component breakage,
which could provoke serious damage to persons or property.

Execution of periodical maintenance controls as indicated in
the chapter "MAINTENANCE AND CLEANING"

1.13

IDENTIFICATION PLATE

The identification label placed on the equipment contains all relevant
data, including Manufacturer data, serial number and the

marking.

«
...
10
11
12
13
14
...
»

Содержание RM32








































Отзывы:

Нет отзывов