background image

1  IMPORTANT ADVICE AND RECOMMENDATIONS 

This instruction manual forms an integral part of the automatic ice-cube maker (also more 
simply called “appliance” in the text) and must be kept for possible future consultation.

 

In the event of the appliance being sold or transferred to another person, this manual must be handed 
over to the new user, in order to enable him to become familiar with the operation of the equipment and 
the corresponding advice and recommendations. 

 

Before installing and using the appliance, read the advice and recommendations contained 

in this instruction manual very carefully. They are given in order to ensure safe installation, use 
and maintenance of the appliance.

 

always remove the plug from the power socket before proceeding with any cleaning or maintenance
operations

to ensure the appliance operates efficiently and correctly, it is essential to comply with the
Manufacturer’s instructions and to make sure that maintenance is performed by specially qualified
personnel

do not remove any of the panels or grilles

do not rest objects on the appliance or in front of the ventilation grilles

always lift the appliance to move it, even slightly. Do not push or pull it

any use of the appliance other than for the production of ice cubes using cold drinking water is to be
considered as improper use

do not obstruct the ventilation and heat-dissipation grilles, since poor aeration - in addition to
reducing efficiency and causing poor operation - may also cause serious damage to the appliance

if the appliance breaks down and/or operates in a faulty way, switch it off by means of the main
switch fitted during the installation phase, remove the plug from the socket (if any), and turn off the
water tap. Do not make any attempt to repair the appliance yourself. Contact only professionally
qualified and authorized personnel

in addition to rendering any form of warranty null and void, modifying (or attempting to modify) this
appliance is extremely dangerous

open and close the door carefully without slamming it

do not use the ice-cube container to cool or preserve food or drinks, as these operations could cause
the drain system to become clogged, thus leading to the container filling up and water leaking out

in the event of a failure, contact the dealer who sold you the appliance; he will be able to give you
the address of your nearest Authorized Technical Service Centre. Always insist on having original
spare parts mounted

any specific information or diagrams regarding particular models will be attached to this instruction
manual

 

Use of this electrical appliance requires compliance with certain fundamental rules; in particular: 

• do not touch the appliance with wet or damp hands or feet
• do not use the appliance when you are barefoot
• do not use extensions in premises such as bathrooms or shower rooms
• do not tug on the power supply cable to disconnect it from the mains
• do not allow the appliance to be used by children, incapable or inexperienced persons, unless they are

supervised or instructions have been issued about the use of the appliance by a person responsible
for their safety

• supervise children to ensure that they do not play with the appliance

Should you decide to scrap appliance, first disconnect the power cable from the mains, and then cut the 
cable off. 

In addition, proceed as follows: 
• break off and remove the door in order to prevent the possible danger of a child getting trapped inside
• do not allow the coolant gas and oil in the compressor to disperse into the environment
• dispose of or recover the various materials according to the provisions established by the current laws

in force in your Country

Содержание ICE32A

















































Отзывы: