E100301X rev5
21/02/14
Before to start the tilting, always wait for the end
of the running cycle.
To activated or deactivate the keyboard use the
key – switch (D).
When the keyboard is on, the microprocessor is
off.
If the keyboard is on, the green light is also on (A).
LOADING (for machine equipped with two way
tilting)
Switch on the keyboard using the key. To open
the door press at the same time the activation key
(below at left) and the “DOOR OPEN” key.
When the door opening is complete, make the
dryer bend to the back pressing at the same time
the activation key (C) and the “LOAD UP” key.
When the loading is completed, bring the dryer in
the original position pressing at the same time the
activation key (C) and the “LOAD DOWN” key.
Close the door pressing at the same time the
activation key (C) and the “CLOSE DOOR” key.
Switch off the keyboard using the key (D).
UNLOADING
Switch on the keyboard using the key (D).
To open the door press at the same time the
activation key (C) and the “DOOR OPEN” key.
When the door opening is complete, make the
dryer bend forward pressing at the same time the
activation key (C) and the “UNLOAD DOWN” key.
When the machine is in the unloading position,
the linen exit can be helped by the slow alternate
rotation of the drum (right and left); to make the
drum rotate, press at the same time the activation
key (C) and the “UNLOAD ROTATION” key
(RIGHT and/or LEFT).
When the unloading operation is ended, bring the
dryer to the orginal position pressing at the same
time the activation key (below – left) and the
“UNLOAD UP” key.
Close the door pressing at the same time the
activation key (C) and the “CLOSE DOOR” key.
Switch off the keyboard using the key (D).
48. SAFETY DEVICE CONTROL
After the machine is turned on, before to start the
drying cycle, it is necessary to control the safety
device correct working.
The user should always stick to the following
procedure:
ACTION SEQUENCE
REACTION
Start a drying cycle and
open the door…
… the dryer should
stop and stay in pause.
Start a drying cycle and
open the filter door…
… the dryer should
stop and stay in pause.
Press (if present) the
emergency stop button
…
… the drum should
stops and the dryer
should turn off.
As soon as the dryer is
electrically supplied …
… the machine must
be in stand-by waiting
for a command (drum
stopped, fan and
heating deactivated)
ATTENTION!
Safety device must always be tested when the
machine is switch on and before to start the
working shift.
49. SCRAPPING
When the machine life cycle arrives to the end,
please proceed with the machine scrapping
following the country rules, keeping separate the
metallic, the plastic, the glass, the
electric/electronic parts.
The above symbol on the appliance or on the
package means that at the end of its life cycle this
product must be collected separately from other
waste material.
For this appliance waste separation, follow the
rules in force in the Country where the machine is
installed.
A correct waste separation avoid dangerous
impact on the environment and make easier the
material recycling.
Unlawful disposal may caused application of
