Diamond AD1B/H-R2, Инструкция по установке, эксплуатации и обслуживанию

Страница: 38 / 115

ENGLISH
GB
15
7.2. Faults Display
Problem Causes Solutions
Pr1
" Pr1 " flashes on the display
and the buzzer emits an
intermittent noise

The wrong type of
probe is installed.

The probe is faulty.

The probe – circuit
board connection is
incorrect.

The temperature
detected by the probe
is out of the limits
accepted by the cold
room probe in use

Contact the after-sales
centre.

Check that the cold room probe
is the NTC type.

Check the integrity of the cold
room probe.

Check correctness of the
instrument - probe connection.

Check that the temperature in
proximity of the cold room probe
is not out of the accepted limits
Cold room probe error
Pr2
" Pr2 " flashes on the display
and the buzzer emits an
intermittent noise
Evaporator probe error
Pr3
" Pr3 " flashes on the display
and the buzzer emits an
intermittent noise
condenser probe error
rtc
The letters " rtc " (clock error)
will flash on the screen
The current time setting
has been deleted.

Set the day and time.
8. INSTALLATION
8.1. Packaging And Unpacking
Move and install the appliance respecting the
information provided by the manufacturer, shown
directly on the packaging, on the appliance and in
this manual.
The lifting and transportation system of the
packaged product envisages the use of a fork-lift
truck or a pallet stacker, using which particular
attention must be paid to balancing the weight in
order to prevent the risk of overturning (avoid
excessive tilting!).
!
ATTENTION: When inserting the lifting
device, pay attention to the gas supply pipe and
the position of the feet.
!
ATTENTION: given the presence of weights
concentrated in the high part of the appliance, do
not drag the appliance during movements (tipping
hazard and damage to feet).
The packaging is made of cardboard and the
pallet of wood. A series of symbols is printed on
the cardboard packaging which highlights, in
accordance with international standards, the
provisions which the appliances must be subject
to during loading, unloading, transportation and
storage.
On delivery, check that the packaging is intact and
has not suffered any damage during
transportation.
Any damage must be notified to the transportation
company immediately.
The appliance must be unpacked as soon as
possible to check that it is intact and undamaged.
Do not cut the cardboard with sharp tools in order
to prevent damage to the steel panels
underneath.
Pull the cardboard packaging upwards.
After having unpacked the appliance, check that
the features correspond to those requested in the
order;
For any anomalies, connect the dealer
immediately.
TOP FRAGILE
HANDLE
WITH CARE
DO NOT EXPOSE
TO HUMIDITY