Diamond Products HCH50, Руководство оператора

Страница: 23 / 52

Operation
Danger
Working with an incorrectly fitted chain will reduce the lifetime of
the chain and there is a danger of the chain breaking.
Use the fitting aid (chain engraving) to correctly insert the chain.
Failure to comply with this regulation may lead to serious physical
injury or death.
Danger
Noise danger
When using the
HCH50 C ha in Saw
hearing protection must be
worn.
If this instruction is not followed irreparable hearing damage may
result.
Danger
Danger from uncontrolled movements
When the
HCH50 Chain Saw
is switched on, always hold it with
both hands using the handles. Thumbs and fingers must be
closed around the handles. Otherwise you may loose control of
the Chain
S
aw. Handles must always be clean and dry.
Failure to observe this regulation may lead to serious physical
injury,
property damage,
and possibly even death
.
Danger
Danger from working at excessive chain speed or with insufficient
water feed.
This can lead to excessive wear of the chain, which in turn can
result in loss of stability and the chain breaking.
Operate the
HCH50 Chain Saw
at the correct speed and with
sufficient water feed.
Do not exceed a hydraulic flow of 45 l / min and 140 bar. The
working pressure of the water should be a minimum of 2.5 bar
and the flow a minimum of 7.5 l / min.
Failure to observe this regulation may lead to serious
physical injury, property damage, and possibly even death
23