Diamond Products HCH50, Руководство оператора

Страница: 14 / 52

Safety instructions
Responsibility
Authorised personnel
Work on or with
Diamond Products
machines or systems should only
be performed by authorised personnel. Personnel are considered by
Diamond Products
to be authorised if they meet the necessary
training and know-how requirements and they have been assigned a
precise functional role.
The personnel qualifications for the corresponding work are contained in
the introduction under “General” of the respective chapters.
The manufacturer
Diamond Products or a company expressly nominated by Diamond
Products is deemed to be the manufacturer of the products supplied
by Diamond Products. Within the context of an integrated quality and
safety control system the manufacturer is entitled to request from the
operator information on the products.
Operator
The operator named
by Diamond Products is the primary, legal entity
responsible for the correct use of the product and f
or the training and use
of the authorised personnel. The operator sets out the mandatory skills and
level of training of the authorised personnel for his company.
Operative (user)
User is the term employed
by Diamond Products t
o designate a person
who independently performs the following work:
•
Setup Diamond Products m
achines or systems for tasks according
to the intended purpose.
• Performs tasks independently and monitors these.
• Locates malfunctions and initiates or performs troubleshooting.
• Carries out servicing and simple maintenance.
• Observes the correction functioning of the safety devices.
Service engineers
Service engineer is a term used b
y Diamond Products to
designate a person who independently performs the following work:
• Insta
lls Diamond Products machines and systems and controls their
correct application.
• Makes adjustments to machines and system for which special access
rights are required.
• Performs repairs, complex service work and corrective work.
14