Diamond Products HCH50, Руководство оператора

Страница: 5 / 52

Product description
Intended purpose
The
HCH50 Chain Saw is designed and built for the following
applications:
• Cutting of concrete (including reinforced), masonry and natural stone
• Cutting of severance cuts, flush cuts and cross-cuts in ceilings, floors
and walls
• Only original
Diamond Products Chain
should be used
Safety measures
Any use other than for the intended purpose constitutes improper use or
misuse.
Since improper use or misuse can result in considerable danger,
here
are some examples
of what we believe constitute improper
use or misuse.
The following applications are prohibited:
• Cutting without the safety devices provided
• Cutting wood, glass and plastics
• Cutting without system and tool cooling
• Cutting in explosion-protected areas
• Cutting loose parts
• Incorrect or absence of waste water disposal (saw sludge)
Workplace
Safety
Allow enough room for
maneuvering
to ensure danger-free working.
Make sure you have sufficient lighting at your workplace.
Clearly cordon off the danger area so that no person can enter the danger
area during sawing.
The front, underneath and rear of the sawing area must be protected so
that persons or equipment cannot be harmed by falling
objects,
concrete slurry
, or by the protruding cutting tool.
Secure
pieces
of concrete that have been loosened
to prevent
falling.
Breathing in the water
vapor
that is created is a health hazard.
Ensure adequate ventilation in sealed-off areas.
The slu
rry
resulting from cutting is
slippery
. Remove th
e slurry
or ensure
that you or other people do not slip on it.
Usage Information
5