Diamatic BMG-780 ULTRAPRO, Руководство по эксплуатации

Страница: 12 / 88

MODEL BMG-780 GRINDER
SECTION 2
SAFETY INSTRUCTIONS
11
OPERATING MANUAL
MARCH 2009
Grinding & Polishing
Observe the local waste disposal regulations; in uncertain situations ask the next
higher authority.
Do not use any aggressive cleaning materials.
Only use lint-free cleaning cloths.
Always verify that any bolted connections that were loosened during service and
maintenance work are properly secure and tight.
If safety devices need to be removed or dismantled during service and repair,
these safety devices must be reinstalled, and inspected immediately after
completion of the servicing and repair work.
Make sure that process materials and replaced parts are disposed of safely and
in an environmentally friendly manner.
Make sure that electrical components used for replacement purposes comply
with the original parts and are correctly adjusted if necessary.
Definition: The machine is in a safe condition where it cannot be a hazard.
Putting the equipment in the Safety off position involves:
•
Switching off the machine.
•
Switching off the dust collector (if being used).
•
Waiting for all drives to stop.
•
Disconnecting all power from the power source.
•
Securing against unintended restart.
Work on electrical equipment may only be performed by a skilled
electrician or by trained persons under the supervision of a skilled
electrician, as well as in accordance with the local electrical
engineering regulations
.
2.6 DEFINITION OF THE SAFETY OFF POSITION