background image

41

Diagram 7 Parts List – Gearbox Assembly, All Models

ITEM       P/N            DESCRIPTION                                                     QTY

  1    177842  Gearbox Assembly  (Includes Items 2-45)     1
  2    177834   Frame Weldment                             1
  3    177728   Bearing, 1.00 Dia Bore                     4
  4    177816   Washer, Flat .438 Dia SAE                 16
  5    020787   Lockwasher, Split .438 Dia                16

  6    020375   Capscrew, Hex Hd .438-14UNC x 1.25        16
  7    177733   Spacer, 112T Gear                          2
  8    177739   Spindle Shaft Weldment                     2
  9    020041   Key, Square .250 x 1.50 Lg                 2
 10    177729   Gear, 112T (Casting)                       2

 11    177734   Bearing, .750 Dia Bore                     2
 12    020764   Washer, Flat .375 SAE                      8
 13    177732   Plate, Bearing                             2
 14    020786   Lockwasher, Split .375 Dia                 8
 15    020323   Capscrew, Hex Hd .375-16UNC x 1.00         8

 16    020541   Screw, Set Soc Cup Pt .250-20UNC x .375    4
 17    177832   Gear & Shaft Weldment                      1
 18    020742   Washer, Flat .313 Dia                     19
 19    020785   Lockwasher, Split .312 Dia                19
 20    197227   Capscrew, Hex Hd M8 x 1.25 x 20mm         19

 21    177738   Roll Pin, .375 Dia x 2.50                  3
 22    177835   Top Gearbox Cover                          1
 23    177874   Lubrication Port Cover                     1
 24    020784   Lockwasher, Split .250 Dia                 1
 25    139761   Capscrew, Hex Hd M6 x 1.0 x 20mm           1

 26    ------   Accessory Disk Assembly, RH - Complete     1
 27    177847    Drive Plate Assy (Includes Items 28-29)   1
 28    ------     Drive Plate                              1
 29    177727     Isolator. Rubber                         6
 30    177816    Washer, Flat .438 Dia SAE                 3

 31    177742    Disk, RH (Machined)                       1
 32    177947    Washer, Sp 1.25 OD x .469 ID x .188       6
 33    176136    Capscrew, Hex Hd .438-14UNC x 2.50        6
 34    020210    Locknut, Fiber .438-14UNC                 3

 35    ------   Accessory Disk Assembly, LH - Complete     1
 36    177847    Drive Plate Assy (Includes Items 37-38)   1
 37    ------     Drive Plate                              1
 38    177727     Isolator, Rubber                         6
 39    177816    Washer, Flat .438 Dia SAE                 3
 40    177744    Disk, LH (Machined)                       1

 41    177947    Washer, Sp 1.25 OD x .469 ID x .188       6 (Effective S/N 323831)
 42    176136    Capscrew, Hex Hd .438-14UNC x 2.50        6
 43    020210    Locknut, Fiber .438-14UNC                 3
 44    020210   Locknut, Fiber .438-14UNC                  6
 45    177763   Grease (Qty in Ounces)                    24

Содержание F60000





















































Отзывы: